15 - 20 June, Hannover/Germany
Van Wijk & Boerma Firepacks
The construction of a conventional pump room is a complex process involving designers, building contractors, electrical fitters, mechanical engineers, suppliers and sub-contractors. Due to the wide diversity, good co-ordination and harmonisation are of the utmost importance. We will relieve you of this time-consuming work, producing the pump chamber to our 'just in time' schedule.The base of the pre-fabricated pump room is 3.20 metres wide and can be supplied in customary lengths of 4, 6, 8, 10 and 12 metres. The pre-fabricated pump room is made to the customer's specifications, so non-standard dimensions are available. By coupling units, we can customise the width and length to your needs.The pre-fabricated pump room will then be built in line with the applicable rules and regulations and always installed to the customer's specifications. Before delivery, the pre-fabricated pump room is extensively tested to check that it is working and properly sealed.Connection: - Pressure, suction and test pipe- All possible pump combinations- Self-supporting construction- Fire-resistant to 60 or 120 minutes- Insulation value up to 3.1 W/m2/°C
Pavilion Fire Prevention
Unique benefits of the Electronic sustaining valve:
Replaces pilot-controlled valves
Functions independently of type of foam
Foam pressure controlled ...
NFPA, EN 12845, CEA
Prevents exceeding max. permitted pressure in piping
Pressure is limited by adjusting speed
System has ...
Our WB-CAN controller has the same range of functions as a normal diesel switch box, but is also able to influence the motor speed using pump pressure or other parameters.
The FOAMMASTER unique benefits are:
Proportioning accuracy within than 1%
Proportioning ratio independent of type of foam
Zero pressure loss in water ...